Everyone is familiar with the use of the lightning surge tester. However, there is no need to talk about the use of the lightning surge tester. So what should we pay attention to when we use the lightning surge tester? I also think that many people don’t know. Today, the editor will give you what you should pay attention to when we use the lightning surge tester.

Precautions for lightning surge tester 

1. The test personnel must be trained and qualified to operate the equipment. When the hands are wet or the relative humidity exceeds 75%, do not use the equipment, because high voltage pulses are applied to the output terminals (for example, 2W, 500W, L1, L2, L3 and other ports), if you change the wiring, you must confirm that the high-voltage power supply is disconnected before proceeding;

2. The FG terminal of the lightning surge tester should be well grounded. This equipment uses a high-voltage mercury switch to generate high-voltage pulses. It is strictly forbidden to test when the equipment is tilted. The internal high-voltage, please do not disassemble or open the shell to work;  

3. When an emergency occurs, press the EMERGENCY key and the instrument will quickly stop the surge output, turn off the internal high voltage, and quickly cut off the power supply. In order to ensure the comparability and repeatability of the test, the test configuration must be standardized;

4. It is strictly forbidden to operate this instrument by non-related personnel

If you want to receive more information about the lightning surge tester, please inquire.